Audio Technica ATW 3141AC Handheld Wireless Microphone system
C Band (541-566Mhz)
With automatic frequency scanning to find and set the best available channel, 200 selectable UHF channels, true diversity protection from RF hits and dropouts, soft-touch controls, easy setup and great sound, the 3000 Series wireless delivers truly professional performance.
The versatile UniPak™ body-pack transmitter features a secure 4-pin locking connector compatible with a wide range of microphones, as well as a guitar cable. A 3-position sliding cover on the transmitter's control panel prevents accidental shut-off or channel-switching.
The handheld transmitter features the stage-proven Artist Elite® AE4100 cardioid dynamic element, robust metal construction and slim ergonomic design.
Features:
Automatic frequency scanning
200 PLL-synthesized channels per band selectable via soft-touch controls on receiver and transmitter
Available in two frequency bands:
Band C: 541.500 - 566.375 MHz (TV Channels 25 - 30)
Band D: 655.500 - 680.375 MHz (TV Channels 44 - 49)
True Diversity operation selects the better signal from two independent receiver sections, reducing dropouts
Interference-resistant UHF band operation
Advanced digital ToneLock™ squelch
Red alert light that warns of low battery power, signal loss and input overload
Transmitter battery-life fuel gauge on the receiver
Ground-lift switch
Balanced and unbalanced audio output jacks
Two receivers can be mounted side-by-side in a single 19" rack space
ATW-T310 UniPak™ transmitter includes Super Hi-Z input that provides optimum load for guitar pickups
ATW-T341 handheld microphone/transmitter features the Artist Elite® AE4100 cardioid dynamic element
OVERALL SYSTEM SPECIFICATIONS
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz
Band D: 655.500 MHz to 680.375 MHz
Number of Channels: 200 total per band
Frequency Stability: ±0.005%, Phase Lock Loop frequency control
Modulation Mode: FM
Normal Deviation: ±10 kHz
Operating Range: 300' typical
Operating Temperature Range: 41° F (5° C) to 113° F (45° C)
Frequency Response: 70 Hz to 15 kHz
RECEIVER SPECIFICATIONS
Receiving System: Dual independent receivers, automatic-switching diversity
Image Rejection: 60 dB nominal, 55 dB minimum
Signal-to-noise Ratio: 110 dB at 35 kHz deviation (IEC-weighted), maximum modulation 75 kHz
Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz)
Sensitivity: 24 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted)
Intermediate Frequency: 243.950 MHz, 10.7 MHz
Audio Output: Unbalanced: 50 mV (at 1 kHz, ±5 kHz deviation, 10k ohm load)
Balanced: 32 mV (at 1 kHz, ±5 kHz deviation, 10k ohm load)
Output Connectors: Unbalanced: 1/4" TS ("mono") phone jack
Balanced: XLRM-type
Power Supply: 120V AC 60 Hz, or 12-18V DC, 500 mA, center positive, with external supply
Dimensions: 8.27" (210.0 mm) W x 1.93" (49.0 mm) H x 7.20" (183.0 mm) D
Weight: 2.4 lbs (1.1 kg)
Accessories Included: AD1205AA 120V 60 Hz in-line AC adapter; two flexible UHF antennas; rack-mount adapters
HANDHELD TRANSMITTER SPECIFICATIONS
RF Power Output: High: 30 mW; Low: 10 mW, nominal
Spurious Emissions: Under federal regulations
Dynamic Range: >=110 dB, A-weighted
Microphone Element: Dynamic cardioid (unidirectional)
Batteries: Two 1.5V AA alkaline (not included)
Current Consumption: High: 230 mA; Low: 180 mA, typical
Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
Dimensions: 9.33" (237.0 mm) long, 1.89" (48.0 mm) diameter
Net Weight: 9.9 oz (280 grams)
Accessory Included: AT8456a Quiet-Flex™ stand clamp
Consumer alert:
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at http://www.fcc.gov/cgb/wirelessmicrophones
