Audio Technica ATW-2110
- Serious advances in affordable professional wireless
- Clear sound quality and rock-solid, dependable performance
- Automatic frequency scanning finds an open channel at the touch of a button
- All 10 user-switchable channels are compatible--for easy use with multiple systems; no confusing frequency groups
- True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
- Tone Lock(TM) tone squelch system fights interference
- Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
- Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
- Includes rack-mount kit and detachable UHF antennas
- Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
- ATW-T220 Handheld Microphone/Transmitter features PRO 41 Capsule for maximum feedback rejection and consistent sound
OVERALL SYSTEM SPECIFICATIONS |
| |
| Operating Frequency |
656.125 to 678.500 MHz |
|
| Number of Channels |
10 total |
|
| Frequency Stability |
±0.005%, Phase Lock Loop frequency control |
|
| Modulation Mode |
FM |
|
| Normal Deviation |
±5 kHz |
|
| Operating Range |
300' typical |
|
| Operating Temperature Range |
41° F (5° C) to 113° F (45° C) |
|
| Frequency Response |
100 Hz to 15 kHz |
|
|
RECEIVER SPECIFICATIONS |
| |
| Receiving System |
Dual independent RF sections, automatic-switching diversity |
|
| Image Rejection |
55 dB nominal, 50 dB minimum |
|
| Signal-to-noise Ratio |
>100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz |
|
| Total Harmonic Distortion |
<1% (10 kHz deviation at 1 kHz) |
|
| Sensitivity |
20 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted) |
|
| Intermediate Frequency |
65.75 MHz, 10.7 MHz |
|
| Audio Output |
Unbalanced: 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
Balanced: 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load) |
|
| Output Connectors |
Unbalanced: 1/4" (6.3 mm) phone jack
Balanced: XLRM-type |
|
| Power Supply |
120V AC 60 Hz, or 12-18V DC, 350 mA, with external supply |
|
| Dimensions |
8.27" (210.0 mm) W x 1.73" (44.0 mm) H
x 6.39" (162.2 mm) D |
|
| Weight |
2.2 lbs (1.0 kgs) |
|
| Accessories Included |
Two flexible UHF antennas, rack-mount adapters, AC adapter |
|
|
BODY-PACK TRANSMITTER SPECIFICATIONS |
| |
| RF Power Output |
12 mW |
|
| Spurious Emissions |
Under federal regulations |
|
| Input Connections |
High impedance, low impedance, bias |
|
| Batteries |
Two 1.5V AA alkaline (not included) |
|
| Current Consumption |
150 mA typical |
|
| Battery Life |
Approximately 9 hours (depending on battery type and use pattern) |
|
| Dimensions |
2.60" (66.0 mm) W x 3.63" (92.3 mm) H x 0.89" (22.5 mm) D |
|
| Net Weight |
2.82 oz (80 g) |
|
|
|
|
List:
$429
$299.95
(Except to Alaska, Hawaii
and foreign countries)
Mics and cables options for the ATW-2110:
AT-GCW
Guitar Input Cable
AT831cW
Cardioid Condenser Lavalier Microphone 
PRO 8HEcW
Hypercardioid Dynamic Headworn Microphone
AT892cW-TH MicroSet
Omnidirectional Condenser Headworn Microphone
AT892cW MicroSet
Omnidirectional Condenser Headworn Microphone 
|
